RIDING INSTRUCTIONS 50
Warning
Danger of accidents Danger of accidents from blocked rear wheels if reverse gear is disengaged while the vehicle is rolling.
– To disengage reverse gear, it is important that you stop the vehicle first.
Note
Transmission damage Danger of transmission damage when disengaging reverse gear while the vehicle is rolling.
– To disengage reverse gear, it is important that you stop the vehicle first.
– Activate the clutch, stop the vehicle and let the engine run at idling speed.
– Press the shift lever up until 1st gear engages.
Info
The reverse gear release lever no longer needs to be activated.
– Slowly release the clutch lever while carefully depressing the accelerator or shifting into neutral.
7.7Braking
Warning
Danger of accidents If you brake too hard, the wheels can lock. When the front wheels lock, the vehicle can no longer be steered.
– Adapt your braking to the traffic situation and the road conditions.
Warning
Danger of accidents Reduced braking caused by spongy pressure point of front or rear brake.
– Have the brake system checked in an authorized KTM workshop, and do not ride any further.
To Next Page
Loading...
Need help?
General
