MAINTENANCE ON CHASSIS AND ENGINE 130
9.57Changing main fuse
– Switch off all power-consuming components and switch off the engine.
100091-10
– The main fuse is located in the starter relay in front of the battery.
– Remove protection covers .
– Remove the faulty main fuse.
Info
You can recognize a blown fuse by its broken filament .
Warning
Fire hazard The electrical system can be overloaded by the use of incorrect
fuses.
– Use only fuses with the prescribed amperage. Never by-pass or repair fuses.
– Insert a new fuse.
Fuse (58011109120)
Info
If the new fuse burns out, contact an authorized KTM workshop.
Tip
The spare fuse should always be present in the starter relay so that it is avail-
able if needed.
– Replace the protection covers.
To Next Page
Loading...
Need help?
General
