13 BRAKE SYSTEM
124
–
Mount and tighten screw
6
.
Guideline
Screw, ball joint
of push rod on
foot brake cylin-
der
M6 10 Nm (7.4 lbf ft)
Loctite
®
243™
–
Attach spring
1
.
13.9 Checking rear brake fluid level
Warning
Danger of accidents An insufficient brake fluid level will cause the brake system to fail.
If the brake fluid level drops below the MIN marking, the brake system is leaking or the brake linings are
worn down.
– Check the brake system and do not continue riding until the problem is eliminated. (Your authorized
KTM workshop will be glad to help.)
Warning
Danger of accidents Old brake fluid reduces the braking effect.
– Make sure that brake fluid for the front and rear brake is changed in accordance with the service
schedule. (Your authorized KTM workshop will be glad to help.)
To Next Page
Loading...
Need help?
General
