EasyManuals Logo

KTM 690 Duke 2018 User Manual

KTM 690 Duke 2018
249 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #169 background image
ELECTRICAL SYSTEM 15
167
V00064-10
Mount protection cap
2
.
Plug in connector
1
.
Finishing work
Install the headlight mask with the headlight. ( p. 164)
Check the headlight setting. ( p. 170)
15.10 Changing the parking light bulb
Note
Damage to reflectorGrease on the reflector reduces the brightness.
Grease on the bulb will evaporate due to the heat and be deposited on the reflector.
Clean and degrease the bulbs before mounting.
Do not touch the bulbs with your bare hands.
Preparatory work
Remove the headlight mask with the headlight. ( p. 163)

Table of Contents

Other manuals for KTM 690 Duke 2018

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KTM 690 Duke 2018 and is the answer not in the manual?

KTM 690 Duke 2018 Specifications

General IconGeneral
Engine TypeSingle-cylinder, 4-stroke
Displacement690 cc
Torque74 Nm @ 6, 500 rpm
Compression Ratio12.7:1
Transmission6-speed
Fuel SystemElectronic fuel injection
Cooling SystemLiquid cooled
Front SuspensionWP USD Ø 43 mm
Rear SuspensionWP Monoshock
Seat Height835 mm
Dry Weight148.5 kg
Fuel Capacity14 liters
Bore x Stroke105 mm x 80 mm
StarterElectric starter
Front Wheel3.50 x 17"
Rear Wheel5.00 x 17"
Front Tire120/70 ZR 17
Rear Tire160/60 ZR 17
Power73 hp (54 kW) @ 8, 000 rpm
Front BrakeBrembo four-piston radial caliper, 320 mm disc
Rear BrakeBrembo single-piston floating calliper, brake disc Ø 240 mm
ABSBosch 9M+ Two Channel ABS
FrameChromium-Molybdenum steel trellis frame, powder-coated

Related product manuals