LIST OF SYMBOLS 28
239
28.1 Red symbols
Red symbols indicate an error condition that requires immediate intervention.
The immobilizer indicator lamp lights up/flashes red – Status or error message for immobi-
lizer/alarm system.
The oil pressure warning lamp lights up red – The oil pressure is too low. Stop immediately,
taking care not to endanger yourself or other road users in the process, and switch off the
engine.
28.2 Yellow and orange symbols
Yellow and orange symbols indicate an error condition that requires prompt intervention. Active driving aids are
also represented by yellow or orange symbols.
Malfunction indicator lamp lights up yellow – The OBD has detected an error in the vehicle
electronics. Come safely to a halt, and contact an authorized KTM workshop.
ABS indicator lamp lights up yellow – Status or error messages relating to ABS. The ABS indi-
cator lamp flashes if the ABS mode "SupMot" is enabled.
TC indicator lamp lights up yellow – The TC is not available. Contact an authorized KTM work-
shop. The TC indicator lamp flashes, if TC actively engages.
The general warning lamp lights up yellow – An operating safety (warning note) message was
detected. This is also shown on the display.
To Next Page
Loading...
Need help?
General
