13 BRAKE SYSTEM
114
ditions, for example when making "wheelies" or if the rear wheel
spins. This causes the ABS to switch off.
To reactivate the ABS, the vehicle must be stopped and the
ignition switched off. The ABS is reactivated when the vehicle is
switched on again. The ABS indicator lamp goes out when you
start off.
13.2 Adjusting the basic position of the hand brake lever
K00356-10
– Adjust the basic position of the hand brake lever to your hand
size by turning adjusting wheel
1
.
Info
Push the hand brake lever forward and turn the adjust-
ing wheel.
Do not make any adjustments while riding.
To Next Page
Loading...
Need help?
General
