KTM 690 Duke 2018 User Manual

18 SERVICE WORK ON THE ENGINE
196
K00370-11
–
Mount and tighten screw plug
8
with the O-ring.
Guideline
Plug, oil screen M20x1.5 15 Nm (11.1 lbf ft)
K00375-10
– Position the oil screen with the O-rings.
–
Mount and tighten screw plug
bk
with the O-ring.
Guideline
Plug, oil screen M20x1.5 15 Nm (11.1 lbf ft)
– Fill up with engine oil at the clutch cover.
Engine oil 1.70 l
(1.8 qt.)
Engine oil
(SAE 10W/60)
(00062010035)
( p. 231)
Engine oil
Alternative engine oil
Engine oil
(SAE 10W/50)
( p. 232)

KTM 690 Duke 2018 Specifications

General

Engine Type	Single-cylinder, 4-stroke
Displacement	690 cc
Torque	74 Nm @ 6, 500 rpm
Compression Ratio	12.7:1
Transmission	6-speed
Fuel System	Electronic fuel injection
Cooling System	Liquid cooled
Front Suspension	WP USD Ø 43 mm
Rear Suspension	WP Monoshock
Seat Height	835 mm
Dry Weight	148.5 kg
Fuel Capacity	14 liters
Bore x Stroke	105 mm x 80 mm
Starter	Electric starter
Front Wheel	3.50 x 17"
Rear Wheel	5.00 x 17"
Front Tire	120/70 ZR 17
Rear Tire	160/60 ZR 17
Power	73 hp (54 kW) @ 8, 000 rpm
Front Brake	Brembo four-piston radial caliper, 320 mm disc
Rear Brake	Brembo single-piston floating calliper, brake disc Ø 240 mm
ABS	Bosch 9M+ Two Channel ABS
Frame	Chromium-Molybdenum steel trellis frame, powder-coated