KTM 690 Duke 2018 User Manual

COMBINATION INSTRUMENT 7
61
K00393-01
– Press the UP or DOWN button until the "Settings" menu appears
on the display. Pressing the SET button opens the menu.
– Press the UP or DOWN button until the "Clock-date set" menu is
marked on the display. Pressing the SET button again sets the
unit of measure.
– Press the SET button.
The hour next to "Clock" flashes.
– Press the UP or DOWN button until the current hour is set.
– Press the SET button.
The minute next to "Clock" flashes.
– Press the UP or DOWN button until the current minute is set.
– Press the SET button.
The day next to "Date" flashes.
– Press the UP or DOWN button until the current day is set.
– Press the SET button.
The month next to "Date" flashes.
– Press the UP or DOWN button until the current month is set.
– Press the SET button.
The year next to "Date" flashes.
– Press the UP or DOWN button until the current year is set.
– Press the BACK button.
Time and date are saved.

KTM 690 Duke 2018 Specifications

General

Engine Type	Single-cylinder, 4-stroke
Displacement	690 cc
Torque	74 Nm @ 6, 500 rpm
Compression Ratio	12.7:1
Transmission	6-speed
Fuel System	Electronic fuel injection
Cooling System	Liquid cooled
Front Suspension	WP USD Ø 43 mm
Rear Suspension	WP Monoshock
Seat Height	835 mm
Dry Weight	148.5 kg
Fuel Capacity	14 liters
Bore x Stroke	105 mm x 80 mm
Starter	Electric starter
Front Wheel	3.50 x 17"
Rear Wheel	5.00 x 17"
Front Tire	120/70 ZR 17
Rear Tire	160/60 ZR 17
Power	73 hp (54 kW) @ 8, 000 rpm
Front Brake	Brembo four-piston radial caliper, 320 mm disc
Rear Brake	Brembo single-piston floating calliper, brake disc Ø 240 mm
ABS	Bosch 9M+ Two Channel ABS
Frame	Chromium-Molybdenum steel trellis frame, powder-coated