17 SERVICE WORK ON THE ENGINE 157
17.2 Changing the engine oil and filter, cleaning the oil screens
601022-10
– Drain the engine oil. ( p. 157)
– Remove the oil filter. ( p. 158)
– Clean the oil screens. ( p. 160)
– Install the oil filter. ( p. 162)
– Fill up with engine oil. ( p. 162)
17.3 Draining the engine oil
Warning
Danger of scalding Engine oil and gear oil get very hot when the motorcycle is ridden.
– Wear appropriate protective clothing and safety gloves. In case of burns, rinse immediately with lukewarm water.
Warning
Environmental hazard Hazardous substances cause environmental damage.
– Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Info
Drain the engine oil while the engine is at operating temperature.
Preparatory work
– Remove the engine guard. ( p. 94)
To Next Page
Loading...
Need help?
General
