To Next Page

To Previous Page

22 TECHNICAL DATA 190

Hard 85 N/mm (485 lb/in)

Spring length 220 mm (8.66 in)

Gas pressure 10 bar (145 psi)

Static sag 18 mm (0.71 in)

Riding sag 70… 80 mm (2.76… 3.15 in)

Fitted length 395 mm (15.55 in)

Shock absorber fluid ( p. 197) SAE 2.5

22.9 Chassis tightening torques

Screw, chain guard EJOT 2 Nm (1.5 lbf ft) –

Screw, combination instrument EJOT 1 Nm (0.7 lbf ft) –

Screw, license plate holder, bottom EJOT 3 Nm (2.2 lbf ft) –

Screw, side cover on spoiler EJOT 1 Nm (0.7 lbf ft) –

Screw, side stand switch EJOT 2 Nm (1.5 lbf ft) –

Screw, SLS valve EJOT 2 Nm (1.5 lbf ft) –

Fitting, side stand switch M4 2 Nm (1.5 lbf ft) –

Spoke nipple, front wheel M4.5 4 Nm (3 lbf ft) –

Bolt, foot brake lever stub M5 6 Nm (4.4 lbf ft) Loctite

243™

Remaining nuts, chassis M5 4 Nm (3 lbf ft) –

Remaining screws, chassis M5 4 Nm (3 lbf ft) –

Screw, brake line holder on swingarm M5 4 Nm (3 lbf ft) –

Screw, cable on starter motor M5 3 Nm (2.2 lbf ft) –

Screw, combination switch, left M5 3.5 Nm (2.58 lbf ft) –

Screw, electrical holder M5 3 Nm (2.2 lbf ft) –

Brand

Model

690 Enduro R

KTM 690 Enduro R User Manual

Questions and Answers: