KTM 790 Adventure 2019 User Manual

10 RIDING INSTRUCTIONS
148
10.2 Starting the vehicle
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result in unconsciousness and death.
– Always make sure there is sufficient ventilation when running the engine.
– Use effective exhaust extraction when starting or running the engine in an enclosed space.
Note
Engine damage High revving speed with a cold engine negatively impacts the lifespan of the engine.
– Always run the engine warm at a low speed.
B00782-10
– Take the motorcycle off the side stand and sit on the motorcy-
cle.
– Make sure that the emergency OFF switch/electric starter but-
ton is in the middle position .
– Switch on the ignition by turning the ignition key to the posi-
tion .
After you switch on the ignition, you can hear the fuel
pump working for about two seconds. The function check
of the combination instrument is run at the same time.
The ABS warning lamp lights up and goes back out after
starting off.
– Shift the transmission into neutral .
The green idle indicator lamp N lights up.

KTM 790 Adventure 2019 Specifications

General

Displacement	799 cc
Transmission	6-speed
Fuel Tank Capacity	20 liters
Weight	189 kg (dry)
Rear Suspension	WP monoshock
Rear Brake	260 mm disc, 2-piston caliper
Ground Clearance	233 mm
Instrumentation	TFT display
Starter	Electric
Fuel System	Electronic Fuel Injection
Engine Type	Liquid-cooled, 4-stroke, parallel twin
Power	95 hp (70 kW) @ 8, 000 rpm
Torque	88 Nm
Seat Height	850 mm
Front Suspension	WP USD Ø 43 mm
ABS	Bosch 9.1 MP
Riding Modes	Street, Offroad
Frame	Chromium-Molybdenum-Steel frame
Front Brake	2 x 320 mm discs, 4-piston calipers
Wheelbase	1, 509 mm (59.4 in)
Traction Control	MTC (Motorcycle Traction Control), disengageable