WHEELS, TIRES 15
243
15.4 Installing the rear wheel
Warning
Danger of accidents Oil or grease on the brake discs reduces the braking effect.
– Always keep the brake discs free of oil and grease.
– Clean the brake discs with brake cleaner when necessary.
Warning
Danger of accidents There is no braking effect to start with at the rear brake after installing the rear
wheel.
– Actuate the foot brake several times before going on a ride until you can feel a firm pressure point.
Main work
– Check the rear hub damping rubber pieces. ( p. 246)
F01956-10
– Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
– Change the rear wheel bearing.
–
Remove washer
1
and the spacers.
–
Clean and grease shaft seal rings
2
and contact surfaces
A
of the spacers.
Long-life grease ( p. 336)
–
Insert the spacers and washer
1
.
To Next Page
Loading...
Need help?
General
