KTM 790 Adventure 2019 User Manual

13 SERVICE WORK ON THE CHASSIS
176
13.6 Mounting the passenger seat
401680-10
– Hook holding lugs of the passenger seat into the bushings on
the subframe, lower the front, and simultaneously push back-
ward.
–
Insert locking pin
1
into the lock housing and push down the
front of the passenger seat until the locking pin engages with
an audible click.
Warning
Danger of accidents The seat can come loose from the
anchoring if it is not mounted correctly.
– After assembly, check whether the seat is correctly
locked and cannot be pulled up.
– Finally, check that the passenger seat is correctly mounted.
13.7 Removing the front rider's seat
Preparatory work
– Remove the passenger seat. ( p. 175)

KTM 790 Adventure 2019 Specifications

General

Displacement	799 cc
Transmission	6-speed
Fuel Tank Capacity	20 liters
Weight	189 kg (dry)
Rear Suspension	WP monoshock
Rear Brake	260 mm disc, 2-piston caliper
Ground Clearance	233 mm
Instrumentation	TFT display
Starter	Electric
Fuel System	Electronic Fuel Injection
Engine Type	Liquid-cooled, 4-stroke, parallel twin
Power	95 hp (70 kW) @ 8, 000 rpm
Torque	88 Nm
Seat Height	850 mm
Front Suspension	WP USD Ø 43 mm
ABS	Bosch 9.1 MP
Riding Modes	Street, Offroad
Frame	Chromium-Molybdenum-Steel frame
Front Brake	2 x 320 mm discs, 4-piston calipers
Wheelbase	1, 509 mm (59.4 in)
Traction Control	MTC (Motorcycle Traction Control), disengageable