KTM 790 Adventure 2019 User Manual

22 TROUBLESHOOTING
306
Faults Possible cause Action
The engine does not turn when
the electric starter button is
pressed
Operating error – Carry out the start procedure.
( p. 148)
12-V battery discharged – Charge the 12-V battery. ( p. 263)
– Check the open-circuit current.
Fuse 1, 2 or 3 blown – Change the fuses of individual power
consumers. ( p. 272)
Main fuse burned out – Change the main fuse. ( p. 267)
No ground connection present – Check the ground connection.
The engine only turns if the
clutch lever is drawn
The vehicle is in gear – Shift the transmission into neutral .
The vehicle is in gear and the
side stand is folded out
– Shift the transmission into neutral .
The engine turns but does not
start
Operating error – Carry out the start procedure.
( p. 148)
Fuse 3 blown – Change the fuses of individual power
consumers. ( p. 272)
The plug-in connection of the
fuel hose connection is not
connected
– Connect the plug-in connection of the
fuel line.
Error in the electronic fuel
injection
– Read out the fault memory using the
KTM diagnostics tool.

KTM 790 Adventure 2019 Specifications

General

Displacement	799 cc
Transmission	6-speed
Fuel Tank Capacity	20 liters
Weight	189 kg (dry)
Rear Suspension	WP monoshock
Rear Brake	260 mm disc, 2-piston caliper
Ground Clearance	233 mm
Instrumentation	TFT display
Starter	Electric
Fuel System	Electronic Fuel Injection
Engine Type	Liquid-cooled, 4-stroke, parallel twin
Power	95 hp (70 kW) @ 8, 000 rpm
Torque	88 Nm
Seat Height	850 mm
Front Suspension	WP USD Ø 43 mm
ABS	Bosch 9.1 MP
Riding Modes	Street, Offroad
Frame	Chromium-Molybdenum-Steel frame
Front Brake	2 x 320 mm discs, 4-piston calipers
Wheelbase	1, 509 mm (59.4 in)
Traction Control	MTC (Motorcycle Traction Control), disengageable