KTM 790 Adventure 2019 User Manual

13 SERVICE WORK ON THE CHASSIS
206
F01925-10
Main work
–
Push dust boots
1
of both fork legs downward.
Info
The dust boots remove dust and coarse dirt particles
from the inside fork tubes. Over time, dirt can accumu-
late behind the dust boots. If this dirt is not removed,
the oil seals behind can start to leak.
Warning
Danger of accidents Oil or grease on the brake discs
reduces the braking effect.
– Always keep the brake discs free of oil and grease.
– Clean the brake discs with brake cleaner when nec-
essary.
– Clean and oil the dust boots and inner fork tubes of both fork
legs.
Universal oil spray ( p. 337)
– Press the dust boots back into the installation position.
– Remove the excess oil.
Finishing work
– Install the front fender. ( p. 204)
– Take the motorcycle off the front lifting gear. ( p. 174)

KTM 790 Adventure 2019 Specifications

General

Displacement	799 cc
Transmission	6-speed
Fuel Tank Capacity	20 liters
Weight	189 kg (dry)
Rear Suspension	WP monoshock
Rear Brake	260 mm disc, 2-piston caliper
Ground Clearance	233 mm
Instrumentation	TFT display
Starter	Electric
Fuel System	Electronic Fuel Injection
Engine Type	Liquid-cooled, 4-stroke, parallel twin
Power	95 hp (70 kW) @ 8, 000 rpm
Torque	88 Nm
Seat Height	850 mm
Front Suspension	WP USD Ø 43 mm
ABS	Bosch 9.1 MP
Riding Modes	Street, Offroad
Frame	Chromium-Molybdenum-Steel frame
Front Brake	2 x 320 mm discs, 4-piston calipers
Wheelbase	1, 509 mm (59.4 in)
Traction Control	MTC (Motorcycle Traction Control), disengageable