KTM 790 Adventure 2019 User Manual

WHEELS, TIRES 15
239
F01962-10
– Position both brake calipers.
The brake linings are correctly positioned.
–
Mount screws
5
on both sides but do not tighten yet.
Guideline
Screw, front
brake caliper
M10x1.25 45 Nm (33.2 lbf ft)
Loctite
®
243™
– Operate the hand brake lever repeatedly until the brake lin-
ings are in contact with the brake disc and there is a pressure
point. Secure the hand brake lever in the activated position.
The brake calipers straighten.
–
Tighten screws
5
on both sides.
Guideline
Screw, front
brake caliper
M10x1.25 45 Nm (33.2 lbf ft)
Loctite
®
243™
–
Position wheel speed sensor
6
in the hole.
–
Mount and tighten screw
7
.
Guideline
Screw, front wheel
speed sensor
M6 10 Nm (7.4 lbf ft)
– Remove the locking piece of the hand brake lever.
– Take the motorcycle off the front lifting gear. ( p. 174)

KTM 790 Adventure 2019 Specifications

General

Displacement	799 cc
Transmission	6-speed
Fuel Tank Capacity	20 liters
Weight	189 kg (dry)
Rear Suspension	WP monoshock
Rear Brake	260 mm disc, 2-piston caliper
Ground Clearance	233 mm
Instrumentation	TFT display
Starter	Electric
Fuel System	Electronic Fuel Injection
Engine Type	Liquid-cooled, 4-stroke, parallel twin
Power	95 hp (70 kW) @ 8, 000 rpm
Torque	88 Nm
Seat Height	850 mm
Front Suspension	WP USD Ø 43 mm
ABS	Bosch 9.1 MP
Riding Modes	Street, Offroad
Frame	Chromium-Molybdenum-Steel frame
Front Brake	2 x 320 mm discs, 4-piston calipers
Wheelbase	1, 509 mm (59.4 in)
Traction Control	MTC (Motorcycle Traction Control), disengageable