KTM 790 Adventure 2019 User Manual

WHEELS, TIRES 15
245
F01953-11
–
Engage the thrust bearing of brake caliper bracket
B
and the
link fork.
– Jack up the rear wheel into the link fork, position it, and insert
the wheel spindle.
The brake linings are correctly positioned.
– Place the chain on the sprocket.
–
Position chain adjuster
3
. Mount nut
4
, but do not tighten
it yet.
Info
Mount the left and right chain adjusters in the same
position.
–
Make sure that chain adjusters
3
are fitted correctly on the
adjusting screws. Tighten nut
4
.
Guideline
In order for the rear wheel to be correctly aligned, the mark-
ings on the left and right chain adjusters must be in the
same position relative to reference markings
C
.
Nut, rear wheel
spindle
M25x1.5 90 Nm (66.4 lbf ft)
Thread and contact area
of wheel spindle greased
–
Position wheel speed sensor
5
in the hole.
–
Mount and tighten screw
6
.

KTM 790 Adventure 2019 Specifications

General

Displacement	799 cc
Transmission	6-speed
Fuel Tank Capacity	20 liters
Weight	189 kg (dry)
Rear Suspension	WP monoshock
Rear Brake	260 mm disc, 2-piston caliper
Ground Clearance	233 mm
Instrumentation	TFT display
Starter	Electric
Fuel System	Electronic Fuel Injection
Engine Type	Liquid-cooled, 4-stroke, parallel twin
Power	95 hp (70 kW) @ 8, 000 rpm
Torque	88 Nm
Seat Height	850 mm
Front Suspension	WP USD Ø 43 mm
ABS	Bosch 9.1 MP
Riding Modes	Street, Offroad
Frame	Chromium-Molybdenum-Steel frame
Front Brake	2 x 320 mm discs, 4-piston calipers
Wheelbase	1, 509 mm (59.4 in)
Traction Control	MTC (Motorcycle Traction Control), disengageable