KTM 790 Adventure 2019 User Manual

COMBINATION INSTRUMENT 7
93
– The combination instrument starts searching for a suitable
headset. If the search was successful, the name of the head-
set is displayed in the Pairing submenu. Press the SET button
to select the device. Press the SET button again to confirm
the Confirm submenu item. The pairing of a headset with the
combination instrument is now completed at this point.
Info
The headset must be in pairing mode for the headset
to be found by the combination instrument. Follow the
instructions in the Owner's Manual of the headset.
Once the pairing is completed, the name of the paired
headset is displayed in the Headset submenu.
Press the UP or DOWN button until the paired device is
marked. The paired device can be deleted by pressing
the SET button.
Not every headset is suitable for pairing with the com-
bination instrument.
– Move the previously paired device into the range of the combi-
nation instrument while the Bluetooth
®
function is active.
The device is automatically paired with the combination
instrument.

KTM 790 Adventure 2019 Specifications

General

Displacement	799 cc
Transmission	6-speed
Fuel Tank Capacity	20 liters
Weight	189 kg (dry)
Rear Suspension	WP monoshock
Rear Brake	260 mm disc, 2-piston caliper
Ground Clearance	233 mm
Instrumentation	TFT display
Starter	Electric
Fuel System	Electronic Fuel Injection
Engine Type	Liquid-cooled, 4-stroke, parallel twin
Power	95 hp (70 kW) @ 8, 000 rpm
Torque	88 Nm
Seat Height	850 mm
Front Suspension	WP USD Ø 43 mm
ABS	Bosch 9.1 MP
Riding Modes	Street, Offroad
Frame	Chromium-Molybdenum-Steel frame
Front Brake	2 x 320 mm discs, 4-piston calipers
Wheelbase	1, 509 mm (59.4 in)
Traction Control	MTC (Motorcycle Traction Control), disengageable