KTM F8401V5 User Manual

11 SERVICE WORK ON THE CHASSIS 45
11.21 Installing the front fender
C00420-10
Main work
–
Position the front fender. Mount and tighten screws
1
and
2
.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Finishing work
– Install the start number plate. ( p. 44)
11.22 Removing the shock absorber x
Preparatory work
– Raise the motorcycle with the lift stand. ( p. 36)
–
Remove the manifold. x
L01294-10
Main work
–
Remove screw
1
.
–
Remove fitting
2
.
L01293-10
–
Press angle lever
3
toward the rear.
–
Press linkage lever
4
downward.
S00126-10
– Lift the swingarm.

KTM F8401V5 Specifications

General

Brand	KTM
Model	F8401V5
Category	Motorcycle
Language	English