11 SERVICE WORK ON THE CHASSIS 48
C00492-10
Condition
The air filter box lid is secured.
–
Mount and tighten screws
1
.
Guideline
Screw, air filter box lid EJOT PT
®
K60x20-Z
3 Nm (2.2 lbf ft)
EJOT PT screw (0017060204)
11.28 Removing the air filter x
Note
Engine failure Unfiltered intake air has a negative effect on the service life of the engine.
– Never operate the vehicle without an air filter as dust and dirt will enter the engine and lead to increased wear.
Warning
Environmental hazard Hazardous substances cause environmental damage.
– Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Preparatory work
– Remove the air filter box lid. ( p. 47)
C00171-10
Main work
–
Detach air filter holder
1
at the bottom and swing it to one side. Remove the air
filter with the air filter support.
– Remove the air filter from the air filter support.
11.29 Installing the air filter x
L00943-10
Main work
– Mount the clean air filter on the air filter support.
–
Grease the air filter in area
A
.
Long-life grease ( p. 102)
101872-10
– Insert both parts together, position them, and fasten them using air filter
holder
1
.
The arrow of marking UP faces upward.
Info
If the air filter is not mounted correctly, dust and dirt may enter the engine
and cause damage.
Finishing work
– Install the air filter box lid. ( p. 47)
To Next Page
Loading...
Need help?
General
