EasyManuals Logo
Home>KTM>Motorcycle>F8401V5

KTM F8401V5 User Manual

KTM F8401V5
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #87 background imageLoading...
Page #87 background image
17 SERVICE WORK ON THE ENGINE 85
Danger
Danger of poisoningExhaust gases are toxic and inhaling them may result
in unconsciousness and/or death.
When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in an enclosed space without an
effective exhaust extraction system.
Start the engine and check that it is oil-tight.
Finishing work
Check the engine oil level. ( p. 82)
17.4 Adding engine oil
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
601829-10
Remove the oil filler plug
1
with the O-ring from the clutch cover.
Add the same engine oil that was used when the motor was changed.
Engine oil (SAE 10W/50) ( p. 100)
Info
For optimal performance of the engine oil, do not mix different types of
engine oil.
If appropriate, change the engine oil.
Install and tighten the oil filler plug with O-ring.
Danger
Danger of poisoningExhaust gases are toxic and inhaling them may result
in unconsciousness and/or death.
When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in an enclosed space without an
effective exhaust extraction system.
Start the engine and check that it is oil-tight.

Table of Contents

Other manuals for KTM F8401V5

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KTM F8401V5 and is the answer not in the manual?

KTM F8401V5 Specifications

General IconGeneral
BrandKTM
ModelF8401V5
CategoryMotorcycle
LanguageEnglish

Related product manuals