9 RIDING INSTRUCTIONS
24
9.1 Checks and maintenance measures when preparing for use
Info
Before every trip, check the condition of the vehicle and ensure that it is safe to operate.
The vehicle must be in perfect technical condition when it is being operated.
H03808-01
– Check the throttle grip, both magnetic switches,
Powerpack LV, multifunctional element, and electric motor for
external damage.
– Check the front brake fluid level. ( p. 64)
– Check the rear brake fluid level. ( p. 71)
– Check the front brake linings. ( p. 66)
– Check the brake linings of the rear brake. ( p. 72)
– Check that the brake system is functioning properly.
– Check the chain for dirt. ( p. 55)
– Check the chain, rear sprocket, motor sprocket, and chain
guide. ( p. 58)
– Check the chain tension. ( p. 56)
– Check the tire condition. ( p. 79)
– Check tire pressure. ( p. 80)
– Check the spoke tension. ( p. 80)
Info
The spoke tension must be checked regularly as incor-
rect spoke tension will strongly impair riding safety.
– Clean the dust boots of the fork legs. ( p. 46)
– Bleed the fork legs. ( p. 45)
– Check the settings of all controls and ensure that they can be
operated smoothly.
– Check the tightness of the easily accessible, safety-relevant
screws and nuts.
– Check the charging level of the Powerpack LV.
9.2 Starting the vehicle
402581-10
–
Remove plug-in stand
1
.
– Press and hold the On/Off button until the multifunctional ele-
ment lights up.
The vehicle is in standby mode.
To Next Page
Loading...
Need help?
General
