SERVICE SCHEDULE 10
29
Every 80 operating hours
Every 40 operating hours
Every 20 operating hours
After 10 operating hours
Check the tightness of the easily accessible, safety-relevant screws and nuts. ○ ● ● ●
Final check: Check the vehicle for safe operation and take a test ride. ○ ● ● ●
Read out the fault memory after the test ride using the KTM diagnostics tool. ○ ● ● ●
Make a service entry in the KTM Dealer.net. ○ ● ● ●
○ One-time interval
● Periodic interval
10.3 Recommended work
Every 40 operating hours
After 20 operating hours / Every 20 operating hours
After 10 operating hours
every 12 months
Change the front brake fluid. ●
Change the rear brake fluid. ●
Service the fork. ○
Perform the shock absorber service. ○
Lubricate the steering head bearing. ( p. 52) ●
Check the pinion shaft bearings, O-rings and the bearing seals. ●
Change the pinion shaft bearings, the O-rings and the bearing seals. ●
○ One-time interval
● Periodic interval
To Next Page
Loading...
Need help?
General
