Kubota B1620 Assembly Instructions

ASSEMBLY INSTRUCTIONS10
BAttaching the Front Combination Light
[B1620, B1820]
1. Attach the front winker stay (1) with the M6 x 14 bolts
(2) and M6 flange nuts (3).
2. Pass the combination light cable through the hole of
the center pillar.
A Install the front turn signal / hazard light at the upper
position.
3. Attach the combination light (1) to the front winker stay
(3) with the M6 flange nuts (2).
4. Connect the combination light cables to the wire
harness cable with the 1-P coupler (1).
A When connecting the cables, pass the cable (2)
without being touched by the rod (3).

Kubota B1620 Specifications

General

Engine Type	Diesel
Cylinders	3
Fuel Type	Diesel
Hydraulic System Type	Open center
Drive	4WD
3-Point Hitch Category	Category I