TIRES, WHEELS AND BALLAST40
ENGLISH
To avoid personal injury:
A Before jacking up the tractor, park it on a firm
and level ground and chock the rear wheels.
A Fix the front axle to keep it from swinging.
A Select jacks that withstand the machine weight
and set them up as shown below.
BRear Wheels
Rear tread width can not be adjusted.
A Do not turn rear discs to obtain wider tread.
A Always attach tires as shown in the drawings.
A If not attached as illustrated, transmission parts may
be damaged. When re-fitting or adjusting a wheel,
tighten the bolts to the following torques then recheck
after driving the tractor 200 m, after one day (8 hours)
and thereafter every 50 hours (as per maintenance
chart).
A Use the tapered bolts for wheels with beveled or
tapered holes.
(1) Front axle case
(2) Jack points
Tire
26x12.00-12 Turf,
26x12.00-12 Bar,
26x12.00-12 Ind.
Tread
(1) Bolt Front 149.2 to 179.0 N-m
(15.2 to 18.3 kgf-m)
Rear 108.5 to 130.2 N-m
(11.1 to 13.3 kgf-m)
To Next Page
Loading...
Need help?
General
