69PERIODIC SERVICE
ENGLISH
A Do not operate the tractor immediately after changing
the transmission fluid.
Run the engine at medium speed for a few minutes to
prevent damage to the transmission.
BCleaning Transmission Strainer
When changing the transmission fluid, disassemble and
rinse the strainer with nonflammable solvent to completely
clean off filings.
When reassembling be careful not to damage the parts.
A Since the fine filings in the oil can damage the
precision component parts of the hydraulic system, the
end of the suction line is provided with an oil strainer.
(1) Dipstick
(2) Oil inlet
(A) Oil level is acceptable within this range.
(1) Drain plug
(1) Strainer
(2) Filter plate
To Next Page
Loading...
Need help?
General
