59PERIODIC SERVICE
ENGLISH
C Test 5 : Switches for the operator's seat, PTO
clutch lever and PTO select lever at "Rear-PTO"
position.
1. Start the engine.
2. Shift the PTO select lever to "Rear-PTO" position.
3. Engage the PTO clutch lever.
4. Stand up. (Do not get off the machine.)
5. The engine must not shut off.
6. If it stops, consult your local KUBOTA Dealer for this
service.
BChecking Wheel Bolt Torque
To avoid personal injury:
A Never operate tractor with a loose rim, wheel,
or axle.
A Any time bolts are loosened, retighten to
specified torque.
A Check all bolts frequently and keep them tight.
Check wheel bolts regularly especially when new. If they
are loose, tighten them as follows.
(1) Brake pedal
(2) Parking brake lock pedal
(3) PTO select lever
(4) PTO clutch lever
(5) Speed control pedal
(6) Range gear shift lever (Hi-Lo)
(7) Operator's seat
(1) 149.2 to 179.0 N-m (15.2 to 18.3 kgf-m)
(1) 108.5 to 130.2 N-m (11.1 to 13.3 kgf-m)
To Next Page
Loading...
Need help?
General
