6. After flushing the radiator, fill it with clean soft water
and the anti-freeze until the coolant level is just
below the radiator cap.
7. Install the radiator cap securely.
8. Fill the recovery tank with coolant up to the “H”
mark on the recovery tank.
9. Start and operate the engine for few minutes.
10. Stop the engine and let it cool.
11. Check the coolant level of the recovery tank and
add the coolant if necessary.
BX1880 and BX2380
BX2680
(1) Radiator cap
(2) Radiator drain plug
(3) Engine drain plug
2. Anti-freeze
WARNING
To avoid serious injury or death:
• When using the anti-freeze, put on some
protection such as rubber gloves. The anti-
freeze contains poison.
• If someone drank anti-freeze, seek immediate
medical help. Do not make a person throw up
unless told to throw up by poison-control-
center or a health care professional. Use
standard first aid and CPR for signs of shock or
cardiac arrest. Call your local poison control
center or your local emergency number for
further assistance.
• When the anti-freeze comes in contact with the
skin or clothing, wash it off immediately.
• Do not mix different types of the anti-freeze. The
mixture can produce chemical reaction causing
harmful substances.
• The anti-freeze is extremely flammable and
explosive under certain conditions. Keep fire
and children away from the anti-freeze.
• When draining fluids from the engine, place
some container underneath the engine body.
• Do not pour waste onto the ground, down a
drain, or into any water source.
• Also, follow the relevant environmental
protection regulations when disposing of the
anti-freeze.
Always use a 50/50 mix of long-life coolant and clean
soft water in KUBOTA engines.
Consult your local KUBOTA Dealer concerning coolant
for extreme conditions.
SERVICE EVERY 2000 HOURS OR 2 YEAR PERIODIC SERVICE
To Next Page
Loading...
Need help?
General
