Kubota M7040SU - Every 100 Hours; Lubricating Grease Fittings

PERIODIC SERVICE54
EVERY 100 HOURS
BLubricating Grease Fittings
Apply a small amount of multipurpose grease to the
following points every 100 hours:
If you operated the machine in extremely wet and muddy
conditions, lubricate grease fittings more often.
N-m (kgf-m) [ft-lbs.]
(1) (2) (3) (4)
2WD
168 to 196
(17.1 to
20.0)
[124 to 145]
---
260 to 304
(26.5 to
31.0)
[192 to 224]
Steel disk
244
(24.9)
[180]
Cast iron disk
260 to 304
(26.5 to 31.0)
[192 to 224]
4WD
260 to 304
(26.5 to
31.0)
[192 to 224]
244
(24.9)
[180]
(1) Grease fitting (Knuckle shaft) [RH, LH]
(1) Grease fitting (Front axle support)
(1) Grease fitting (Front axle support)
(1) Grease fitting (Front axle gear case support) [RH, LH]