G-12
ZD25F, WSM
G GENERAL
7. CHECK AND MAINTENANCE
CAUTION
• Be sure to check and service the machine on a flat place with engine shut off, the parking brake on and
chock the wheels.
[1] DAILY CHECK
To prevent trouble from occurring, it is important to know the condition of the machine. Check the following items
before starting.
Checking
• Check areas where previous trouble was experienced.
• Walk around the machine.
1. Tire pressure, wear and damage
2. Oil and water leak
3. Engine oil level
4. Transmission fluid level
5. Coolant level in the recovery tank
6. Damage of machine body, tightness of all bolts and nuts
7. Radiator screen
8. Panel screen
9. Brake play
10.Air cleaner
11.Fuel level
12.Oiling
• Mower
1. Oil leak
2. Make sure blade cap screws are tight.
3. Check blades for wear or damage.
4. Check all hardware.
5. Make sure all pins are in place.
6. Mower deck cleaning
7. Greasing
• While sitting in the operator’s seat,
1. Motion control lever
2. Parking brake
• Turning the key switch “ON”
1. Performance of the easy checker light
• Starting the engine,
1. Color of the exhaust fumes
2. Safety start switch, seat safety control and another safety control and another safety devices.
3. Check for abnormal noise and vibration.
To Next Page
Loading...
Need help?
General
