KYMCO GRAND DINK 250 User Manual

10. A.C. GENERATOR/STARTER CLUTCH
10-3
GRAND DINK 250
RIGHT CRANKCASE COVER
REMOVAL
Disconnect the water hoses from the right
crankcase cover.
Remove the nine bolts attaching the right
crankcase cover and the cover.
STATOR REMOVAL
Remove the two pulser coil attaching screws
and the pulser coil.
Remove the three A.C. generator stator bolts
and the stator.
FLYWHEEL REMOVAL
Hold the flywheel with a flywheel holder and
remove the flywheel nut.
Remove the flywheel with a flywheel puller.
Bolts
Water Inlet Hose
Water Outlet Hose
A.C. Generator Stato
r
Screws
Fl
y
wheel Nu
t
Fl
y
wheel Holde
r
When removing the pulser coil and
stator, be careful not to damage them to
avoid shorted or broken wire.

Bolts
Pulser Coil
Fl
y
wheel Pulle
r

KYMCO GRAND DINK 250 Specifications

General

Brand	KYMCO
Model	GRAND DINK 250
Category	Scooter
Language	English