KYMCO GRAND DINK 250 User Manual

8. DRIVE AND DRIVEN PULLEYS/
KICK STARTER
8-3
GRAND DINK 250
LEFT CRANKCASE COVER
REMOVAL
Loosen the drive belt air tube band screw.
Remove the four bolts on the left crankcase
surface cover.
Remove the left crankcase cover bolts and
left crankcase covers.
Remove the seal rubber and dowel pins.
INSTALLATION
Install the dowel pins and the seal rubber.
Install the left crankcase cover.
Install the cable clamp to the specified
location. Install and tighten the left
crankcase cover bolts.
Air Tube Band
Bolts
Left Crankcase Cove
r
Dowel Pins
Seal Rubbe
r
Left Crankcase Cove
r
Bolts
Cove
r

KYMCO GRAND DINK 250 Specifications

General

Brand	KYMCO
Model	GRAND DINK 250
Category	Scooter
Language	English