Section 7 COPIER MANAGEMENT FUNCTIONS
7-99
8. Hard disk management
Perform the following procedure to access the “HDD management
mode” screen and check available space and/or delete any invalid
data on the optional Hard Disk.
1
With the content of the “Basic” tab displayed, press the
[Default setting/Counter] key.
The “Default setting” screen will be displayed.
2
Touch the “BOX Management” [“Hard Disk Management”]
key.
Inch specifications
Default setting
Copy
default
Machine
default
Language Management
End
BOX
Management
Bypass
setting
Document
Management
Register
orig. size
Print
report
Counter
check
User
Adjustment
Default setting / Counter
Metric specifications
Default setting
Copy
default
Machine
default
Language Management
End
Hard Disk
Management
Bypass
setting
Document
Management
Register
orig. size
Print
report
Counter
check
User
Adjustment
Default setting / Counter
3
Use the keypad to enter the 4-digit management code.
The factory default setting for 30 cpm copiers is “3000”, for
40 cpm copiers is “4000” and for 50 cpm copiers is “5000”.
If the entered code matched the registered one, the “HDD
Management mode” [“HDD Management”] screen will be
displayed.
Inch specifications
4
Touch the “On” key under “Check HDD capacity” (left side of
the touch panel). The overall size of the hard disk, as well
as the currently available space, will be displayed. If you
want to delete any invalid data, go to the next step. If you
are finished with this procedure, go directly to step 6.
Inch specifications
To Next Page
Need help?
General