Section 5 OTHER CONVENIENT FUNCTIONS
5-4
2. Copying two-page originals onto separate sheets
[Page separation/Split copy modes]
(1) Page separation/Split copy from book originals
With this mode, the two facing pages of an open-faced original such
as a book, a magazine, and the like are each copied onto a separate
sheet of paper.
NOTES
Inch specifications
• Only 8 1/2" x 11", 11" x 17", A5R, B5R, A4R, B4 and A3 size
originals and 11" x 8 1/2" size copy paper can be used in this mode.
Depending upon the size of the originals, the image will be enlarged
or reduced to fit the size of the copy paper.
Metric specifications
• Only A5R, B5R, A4R, B4, A3, 8 1/2" x 11" and 11" x 17" size
originals and A4 size copy paper can be used in this mode.
Depending upon the size of the originals, the image will be enlarged
or reduced to fit the size of the copy paper.
Metric specifications (Asia Pacific)
• Only A5R, B5R, A4R, B4, A3, 8 1/2" x 11" and 11" x 17" size
originals and B5 or A4 size copy paper can be used in this mode.
Depending upon the size of the originals, the image will be enlarged
or reduced to fit the size of the copy paper.
(2) Page separation/Split copy from 2-sided originals
With this mode, the two sides of a 2-sided original are each copied
onto a separate sheet of paper.
NOTE
The Document Processor (option) must be installed on your copier in
order to use this mode.
1
Set the originals to be copied.
2
Touch the “Function” tab. The content of the “Function” tab
will be displayed.
3
Touch the “2 sided/Separation” [“2-sided/Split”] key.
The “2 sided/Separation” [“2-sided/Split”] screen will be
displayed.
Inch specifications
To Next Page
Need help?
General