Section 5 OTHER CONVENIENT FUNCTIONS
5-29
12. Automatic sorting of copy sets without the Document Finisher
[Sort/Finished mode]
Since copying in this mode is performed after multiple originals are
scanned and memorized, copies can be sorted into the required
number of sets even without the optional Document Finisher.
NOTES
• If you do not have paper of the same size but different orientations
available for paper feed, copies will be ejected without being
“sorted” in this way.
•You can also select whether or not the Sort and/or the Finished
modes will be the default setting in the initial mode. (See “Sort/
Finished mode ON/OFF” on page 7-78.)
1
Set the originals to be copied.
2
Touch the “Function” tab. The content of the “Function” tab
will be displayed.
3
2
1
3
2
1
3
2
1
3
2
1
1
1
1
3
3
3
2
2
2
3
2
1
3
Touch the “Sort/Finished” key. The “Sort/Finished” screen will
be displayed.
Inch specifications
5
Touch the “On” [“1 set”] key.
6
Use the keypad to set the number of copies to be made.
7
Press the [Start] key.
Copying will start.
(when there is paper loaded of the same
size but different orientation)
When “Sort:ON” and “On” [“1 set”] are
selected
When “Sort:OFF” and “On” [“Output each
page”] are selected
To Next Page
Loading...
Need help?
General