Kyocera ECOSYS FS-3140MFP User Manual

8
8-99
Default Setting (System Menu)
6 Press the OK key. This displays the density selection
screen for the mode selected in step 5. The screen
shown is the one when [Manual] is selected.
7 Press the U or V key to select the density from [-3
Lighter] to [+3 Darker].
8 Press the OK key. Completed. is displayed and the
screen returns to the Copy Denst. Adj. menu.
Send/Box Density
Adjust scan density when sending or storing the data in Document Box. Adjustment can be made in 7 levels both in
auto and manual density modes.
1 In the Sys. Menu/Count. menu, press the U or V key to
select [Adjust/Maint.].
2 Press the OK key. The Adjust/Maint. menu appears.
3 Press the U or V key to select [Send/Box Density].
4 Press the OK key. Send/Box Density appears.
5 Press the U or V key to select [Auto] or [Manual].
6 Press the OK key. This displays the density selection
screen for the mode selected in step 5. The screen
shown is the one when [Manual] is selected.
7 Press the U or V key to select the density from [-3
Lighter] to [+3 Darker].
Manual: a b
3 -1
*********************
5 +1
4 * 0 Normal
Sys. Menu/Count.: a b
: Document Box
; Edit Destination
*********************
[ Exit ]
< Adjust/Maint.
Adjust/Maint.: a b
*********************
2 Send/Box Density
3 Correct. Bk Line
[ Exit ]
1 Copy Denst. Adj.
Send/Box Density: a b
*********************
2 Manual
[ Exit ]
1 Auto
Manual: a b
3 -1
*********************
5 +1
4 * 0 Normal

Kyocera ECOSYS FS-3140MFP Specifications

General

Brand	Kyocera
Model	ECOSYS FS-3140MFP
Category	Printer
Language	English