Address Book
4
Modify the settings for SMB and FTP accesses as desired. When the Test
button is pressed, this machine tries to connect to the SMB or FTP server.
5
Click Submit. To cancel, click Back.
Deleting a Contact
1
Click Address Book in the navigation menu. The Addresses page appears.
2
Select the contact(s) you want to delete by selecting the checkbox to the left.
If you want all contacts displayed on the page deleted, click Check All. To
deselect all, click None.
3
Click Delete.
Groups
This page allows you to add, edit or delete groups of contacts. In the
Addresses page, contacts and groups are listed together. Contacts are
identified by the 'single-person' icon and groups by the 'triple-person' icon. You
can filter the display for contacts or groups by choosing Contact or Group on
the Type drop-down list.
Adding a New Group
1
Click Address Book in the navigation menu. The Addresses page appears.
2
Click Add Group. The New Group - Property page opens.
3
Enter the group's Number, or leave it to the system to automatically assign a
number, and the group's Name.
4
Add contacts to the group by clicking the plus sign (+). The Addresses page
appears.
5
Select the contact to join in the group by selecting the Select checkbox to the
left. You can select more than one checkbox at a time. Note that the contacts to
join must already have been existent on the Addresses page.
6
Click Submit. You are returned to the Property page. To delete a contact, click
the X sign.
7
Click Submit again. Repeat the above steps to add more groups.
Editing a Group
1
Click Address Book in the navigation menu. The Addresses page appears.
2
Select the group you want to edit by clicking its Number or Name. The
Property page of the group opens.
COMMAND CENTER RX 5-2
To Next Page
Loading...
Need help?
General