Settings Pages
Enter the NDS Context.
Printer Server Mode
Enables or disables Print Server Mode.
Print Server Name
Enter the Print Server Name.
Queue Polling Interval
Enter the Queue Polling Interval in seconds.
Password (optional)
Enter the Password, if required. Login to NetWare will be successful only if
the password set here matches the Printer Server password set within the
NetWare utilities.
Remote Print Mode
Enables or disables Remote Print Mode.
Print Server Name
Enter the name of the printer server that the remote printer belongs to.
Job Timeout
Enter the timeout in seconds.
Advanced > Protocols > IPP
Using IPP (Internet Printing Protocol) or IPP over SSL, you can print to the
device over the Internet, or an intranet.
IPP
Enables or disables IPP.
IPP Port Number
Sets the port number to be used by IPP. In normal situations, set this port
number to 631, e.g. http://(IP address):631/printers/lp1
IPP over SSL
Enables or disables the IPP over SSL protocol. When IPPS is set to On, SSL
in the Secure Protocol Settings must also be set to On. For details on secure
protocols, see Advanced > Security > Secure Protocols on page 6-49.
IPP over SSL Port Number
Sets the port number to be used by IPP over SSL. In normal situations, set
this port number to 443, e.g. https://(IP address):443/printers/lp1
Advanced > Protocols > ThinPrint
Enabling ThinPrint allows the reception and decompression of compressed print
jobs using the ThinPrint technology within a network. For the implementation,
the system uses a ThinPrint port. The default port is port 4000.
ThinPrint
Enables or disables the ThinPrint protocol.
ThinPrint Port Number
Set the ThinPrint Port Number or use the default port 4000.
ThinPrint over SSL
Enables or disables the ThinPrint over SSL protocol. When SSL is set to On,
SSL in the Secure Protocol Settings page must also be set to On. For details
COMMAND CENTER RX 6-37
To Next Page
Loading...
Need help?
General