2NM/2NX/2NY/2NZ/2P0/2P6
1-5-36
1-5-6 [Transfer/Separation section
(1) Transfer/Separation
The transfer and separation section consists mainly of the transfer roller, separation electrode and drum sep-
aration claws.
A high voltage generated by the high voltage PWB (HVPWB) is applied to the transfer roller for transfer charg-
ing.
Paper after transfer is separated from the drum by applying separation charging that is output from the high
voltage PWB (HVPWB) to the separation electrode.
Figure 1-5-60
Figure 1-5-61
1 2
3 4
[Component formation]
1. Paper chute guide
2. Drum
3. Transfer roller
4. Separation needle
2
3
4
1
To Next Page
Loading...
Need help?
General
