2NM/2NX/2NY/2NZ/2P0/2P6
1-3-37
U147 Set Toner Apply
Description
A mode setup of the operation which removes the toner in the development unit which carried out
the charge rise is performed.
Purpose
The basic target does not need to change a setup.
However, the mode is changed when outputting a manuscript with an always low printing rate in
large quantities.
* : If the toner which carried out the charge rise stagnates in a development unit, concentra-
tion will fall.
Method
1. Press the start key.
2. Select [SGE] or [PDR].
Display Description
Setting
range
Initial
setting
Change in
value per step
SGE Development T7 practice-standard
printing rate
0.0 to 3.0 1.0 -
PDR Drum toner belt magnification setup 0 to 5 1 -
Setting
1. Change the setting value using the cursor right/left keys or numeric keys.
2. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
To Next Page
Loading...
Need help?
General
