Kyocera ECOSYS M3040dn Service Manual

2NM/2NX/2NY/2NZ/2P0/2P6
1-5-38
(1-1) Detaching and refitting the transfer roller
Procedure
1. Remove the drum unit.
(See page 1-5-34)
2. Release four hooks by sliding to left the
paper chute guide.
3. Remove the paper chute guide upward.
Figure 1-5-63
4. Remove the axes of transfer roller from
each bush.
5. Remove the transfer roller assembly
upward.
6. Check or replace the transfer roller
assembly and refit all the removed
parts.
Figure 1-5-64
Paper shute guide
Hooks
Bush
Axis
Transfer
roller
Axis
Transfer
roller
Bush
Transfer roller assembly

Kyocera ECOSYS M3040dn Specifications

General

Brand	Kyocera
Model	ECOSYS M3040dn
Category	All in One Printer
Language	English