3-3
Preparation before Use > Using the Operation Panel
Operation Method
This section explains how to operate the setting menus on the message display.
Displaying the Menus and Configuring Settings
Press the [
System Menu/Counter
] key or [
Function Menu
] key to display the setting menus. Press the [
ā²
] key, [
ā¼
]
key, [
ā
] key, [
āŗ
] key, [
OK
] key, or [
Back
] key to select a menu, and perform settings.
Press the [System Menu/Counter] key or
[Function Menu] key to display the setting
menus.
The directions of usable arrow keys
are shown on the screen displayed.
When the [ā²] or [ā¼] key is
pressed, the selection moves
line by line.
When the [ā] or [āŗ] key is
pressed, the selection moves in
units of one page.
When [OK] is displayed, press the
[OK] key to confirm the selection.
Press the [OK] key to display
the selected menu.
The selected item is displayed with
[*] (asterisk) at the beginning.
Press the [OK] key to confirm
the selected setting.
When the [ā²] or [ā¼] key is pressed,
the selection moves line by line.
Press the [Back] key to return to
the screen one level higher.
Setting menus
Normal screen
Canceling the menu operation
When [Exit] is displayed, press [Exit] to exit
the setting menu and return to the normal
screen.
When other function keys are pressed, the
menu operation is canceled and the screen
of the corresponding function appears.
To Next Page
Loading...
Need help?
General
