Kyocera ECOSYS M3040dn User Manual

7-15
Status/Job Cancel > Checking Device Status
Checking Device Status
Configure the devices/lines installed or connected to this machine or check their status.
1
Display the screen.
Press the [ Status/Job Cancel ] key.
2
Check the status.
Press the [ ▲ ] or [ ▼ ] key to select the items you want to check. Then, press the [ OK ] key to
show the status of the selected device.
The items you can check are described below.
"Scanner"
The status of an original scanning or the error information (paper jam, opened cover, etc.) is
displayed.
"Printer"
Error information such as paper jam, out of toner, or out of paper, and status such as waiting or
printing are displayed.
"FAX"
• The information such as sending/receiving and dialing is displayed.
• Press [Line Off] to cancel a fax in sending/receiving.
For details, refer to the
FAX Operation Guide .
"USB Memory"
• The usage and capacity of the external media connected to this machine are displayed.
• Press [Remove] to safely remove the external media.
"SSD"
The status of the optional SSD is displayed.
"USB Keyboard"
The status of the optional USB Keyboard is displayed.
"Wireless Network"
The connection status of the optional Wireless Network Interface Kit is displayed.
21
Status:
Scanner
Pause
09
Printer
10
FAX
11

Kyocera ECOSYS M3040dn Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Max Paper Size	A4
Scan Resolution	600 x 600 dpi
Output Capacity	250 sheets
Copy Resolution	600 x 600 dpi
Maximum Copy Size	A4
Operating Systems	Windows, Mac OS, Linux
Functions	Print, Copy, Scan
Print Speed	40 ppm
Scan Speed	40 ipm
Connectivity	USB 2.0, Ethernet
Warm-up Time	15 seconds
Memory	512 MB
Paper Size	A4, A5, A6, B5, Letter, Legal
Paper Weight	60-220 g/m²
Copy Speed	40 cpm
Scan Type	Color and Monochrome