8-32
Setup and Registration (System Menu) > System Menu
TonerAlert Level
Copy
Configure settings for copying functions.
Common Settings TonerAlert Level
Item Description
TonerAlert Level
Set the amount of remaining toner to notify the administrator when to order a toner when the toner is running
low.
Value: Off, On
Selecting [Off] alerts you low toner when the amount of remaining toner becomes 5%.
If [On] is selected, set the amount of remaining toner to alert. The setting range is 5 to 100% (in 1%
increments).
Copy
Item Description
Copy Paper Selection
Set the default paper selection.
Value: Auto, Def. PaperSource
AutoPaperSelect.
If [Auto] is selected for Paper Selection, set the paper size selection method when the
zoom changes.
Value
MostSuitableSize: Selects paper size based on the current zoom and the size of
the original.
Same as OrigSize: Selects paper that matches the size of the original, regardless
the zoom.
Auto % Priority
When a paper source of different size from the original is selected, select whether
automatic zoom (reduce/zoom) is performed.
Value: Off, On
Select Key Set.
Commonly used copying functions can be registered to the Select key. Functions can
be easily configured by pressing the Select key.
Value: None, Quiet Mode, Paper Selection, Collate, Duplex, Zoom, Combine,
Original Size, Orig. Orientation, Original Image, Density, EcoPrint,
Continuous Scan, File Name Entry, JobFinish Notice, Print Override, Sharpness,
Backgrnd Density, Prevent Bleed-t
To Next Page
Need help?
General
