3-39
Preparation before Use > Registering Destinations in the Address Book
Adding a Destination on One Touch Key (One Touch
Key)
Assign a new destination (contact or group) to an one touch key. A maximum of 22 destinations can be registered.
1
Select the One Touch Key to be registered.
1
In the Send or FAX screen, press the One Touch Key that you want to register and hold it
(2 seconds or more).
2
Press the [
ā²
] or [
ā¼
] key to select a key number, and press the [
OK
] key.
Select a One Touch Key number with no registered destination.
2
Select the destinations.
1
Press the [
ā²
] or [
ā¼
] key to select the destination (contact or group) you want to register to
the One touch key from the Address Book.
2
Select the destination to be registered to the One touch key from the destinations
registered in the addresses and press the [
OK
] key.
3
Press the [
OK
] key.
The destination will be added to the One Touch Key.
ā¢ Numbers 1 to 11 are the One Touch Key numbers while the [
Shift Lock
] indicator is switched off. Numbers 12 to 22
are the One Touch Key numbers while the [
Shift Lock
] indicator is switched on by pressing the [
Shift Lock
] key.
ā¢ Refer to Specifying Destination on page 5-16
for use of One Touch Key.
ā¢ You can add One Touch keys and change their settings on Command Center RX.
Registering Destinations (page 2-48)
To Next Page
Loading...
Need help?
General
