8-9
Setup and Registration (System Menu) > System Menu
TCP/IP
Settings
Protocol Detail
Select the settings for Protocol Detail.
NetBEUI
Selects whether or not to receive documents using NetBEUI.
*1
Value: Off, On
SNMPv3
Select whether to communicate using SNMPv3.
*1
Value: Off, On
FTP(Server)
Select whether or not to receive documents using FTP.
*1
Value: Off, On
FTP(Client)
Select whether or not to send documents using FTP. When selecting [On], set
the FTP Port Number. Use the FTP default port 21.
Value: Off, On, Port 1 - 65535
SMB
Select whether or not to send documents using SMB.
Value: Off, On, Port 1 - 65535
SNMP
Select whether to communicate using SNMP.
*1
Value: Off, On
SMTP
Select whether to send E-mail using SMTP.
Value: Off, On
POP3
Select whether or not to receive e-mail using POP3.
Value: Off, On
RAW Port
Select whether to receive documents using Raw Port.
*1
Value: Off, On
LPD
Select whether to receive documents using LPD.
*1
Value: Off, On
IPP
Select whether to receive documents using IPP. When selecting [On], set the
IPP default Port Number. Use the SMB default port 631.
*1
Value: Off, On
IPP over SSL
Select whether to receive documents using IPP over SSL.
*1
Value: Off, On
HTTP
Select whether to communicate using HTTP.
*1
Value: Off, On
HTTPS
Select whether to communicate using HTTPS.
*1
Value: Off, On
LDAP
Select whether or not to use LDAP.
Value: Off, On
ThinPrint
Select whether or not to use ThinPrint. When selecting [On], set the ThinPrint
Port Number. Use the ThinPrint default port 4000.
Value: Off, On, Port 1 - 32767
ThinPrintOverSSL
Select whether or not to use ThinPrintOverSSL. SSL must be set to [On] in SSL
on page 8-11.
Value: Off, On
*1 The setting will be changed after restarting the device or the network for the machine.
To Next Page
Loading...
Need help?
General
