Kyocera ECOSYS M3040dn User Manual

2-22
Installing and Setting up the Machine > Energy Saver function
2 Press the [▲] or [▼] key to select [Common Settings], and press the [OK] key.
3 Press the [▲] or [▼] key to select [Timer Setting], and press the [OK] key.
4 Press the [▲] or [▼] key to select [Sleep Level], and press the [OK] key.
2
Select the Sleep level.
Press the [▲] or [▼] key to select [Quick Recovery] or [Energy Saver], and press the [OK] key.
When [Energy Saver] is set, next go on to set whether or not to use Energy Saver mode for
each function.
3
Set the Sleep rule.
1 Press the [▲] or [▼] key to select the function to be set, and press the [OK] key.
[Card Reader] is displayed when the optional Card Authentication Kit is installed.
[FAX] is displayed only on products with the fax function installed.
2 Press the [▲] or [▼] key to select [Off] or [On], and press the [OK] key.
Repeat steps 3-1 to 3-2 to set for a different function.
21
Sys. Menu/Count.:
User/Job Account
Exit
04
User Property
05
Common Settings
06
21
Common Settings:
Date Setting
Exit
08
Timer Setting
10
Error Handling
09
21
Timer Setting:
PanelReset Timer
Exit
02
Sleep Level
03
04
Low Power Timer
Sleep Level:
Quick Recovery
Exit
01
Energy Saver
02
*
21
21
Energy Saver:
Network
01
Card Reader
02
FAX
03
Exit
21
Network:
Off
01
On
02
*

Kyocera ECOSYS M3040dn Specifications

General

Brand	Kyocera
Model	ECOSYS M3040dn
Category	All in One Printer
Language	English