8-22
Setup and Registration (System Menu) > System Menu
Show Power Off Message
[System Menu/Counter] key > [Common Settings] > [Show Power Off Message]
Home
[System Menu/Counter] key > [Home]
Configure settings for Home screen.
Editing the Home Screen (page 2-14)
Document Box/Removable Memory
[System Menu/Counter] key > [Document Box/Removable Memory]
Configures settings related to the Custom Box and Job Box.
Item Description
Show Power Off Message Set the mode whether display a confirmation message in power supply off.
Value: Off, On
Item Description
Custom Box Configure settings for Custom Box.
Add/Edit Box
Creating a New Custom Box (page 5-21)
Default Setting Auto File Deletion Time
Set the time to automatically delete stored documents.
Job Box Configure settings for Job Box.
Quick Copy Job
Retention
To maintain free space on the hard disk, you can set the maximum number of stored
jobs.
Value: number between 0 and 300
When 0 is set, Quick Copy cannot be used.
Deletion of Job
Retention
This setting specifies that documents, such as Private Printing, Quick Copying, or
Proof and Hold Printing, saved temporarily in the job box are automatically deleted
after they have been saved for a set time.
Value: Off, 1 hour, 4 hours, 1 day, 1 week
This function is valid for documents saved after the function is set. Regardless of this
function setting, temporary documents are deleted when the power switch is turned
off.
Quick Setup Registration Select the functions to be registered for Quick Setup. Six keys of the Quick Setup
screen are allocated to typical functions but can be changed as necessary.
Six items in the following options are available.
Paper Selection, Collate/Offset, Staple/Punch
*1
, Duplex, Combine, Delete after
Printed
Value: Off, Key 1 to 6
*1 Display only when an optional Document Finisher is installed. When a punching unit is not installed, this item name
is "Staple".