8-52
Setup and Registration (System Menu) > System Menu
Sleep Level (models except
for Europe)
Select the sleep level.
Set the Energy Saver mode to reduce power consumption even more than normal
Sleep mode.
Value: Quick Recovery, Energy Saver
This function will not be displayed when the optional Network Interface Kit or Fiery
controller is installed.
Sleep Rules Select whether to use the Energy Saver mode for the following functions individually:
•Network
• USB Cable
• ID Card Reader
*1
• Application
Value: Off, On
When the machine has entered sleep mode with Energy Saver setting, it does not
wake from sleep mode when it receives print data from a PC connected by USB
cable. Also, the ID card cannot be recognized.
EnergySaver
RecoveryLevel
Select the method of recovery from energy saver.
Value:
Full Recovery: This mode enables the use of all functions immediately.
However, this mode saves less energy.
Normal Recovery: In this mode, you can select the method from the following:
enabling the use of all functions immediately or enabling
the use of desired functions only.
If you want to use all functions immediately, select the
[Energy Saver] key to execute recovery.
Power Saving Recovery: This mode enables the use of desired functions only.
This mode saves energy most effectively.
Weekly Timer Settings Configure settings for switching the machine into Sleep mode and waking it
automatically at a specified time for each day of the week.
Weekly Timer Select whether to use Weekly Timer.
Value: Off, On
Schedule Specify the time for each day of the week at which the machine enters Sleep mode
and recovers.
Retry Times Set the number of retry to switch the machine into Sleep mode.
Value: Limited Retries, Unlimited Retries
If [Limited Retries] is selected, set the number of retry. The setting range is 0 to 10.
Retry is not performed when "0" is set.
If [Unlimited Retries] is selected, retry is performed until the machine enters Sleep
mode.
Retry Interval Set the retry interval.
Use [-] / [+] to enter a number.
Value: 10 to 60 seconds (increments of 10 seconds)
Item Description