10-25
Troubleshooting > Troubleshooting
Cannot print the
specified number of
copies.
*1
— Only one copy is available.
Select [Continue] to continue
printing. Select [Cancel] to
cancel the job.
—
Cannot process this
job.
*1
― Restricted by Authorization
settings. The job is canceled.
Select [End].
―
― Restricted by Job Accounting.
The job is canceled. Select
[End].
page 9-21
Cannot punch at the
specified position.
Have you selected a position
that cannot be punched?
If the selected paper is not
changed and [Continue] is
selected, punch is released.
Select the available paper.
Select [Continue] to print.
page 6-11
Cannot punch this
paper.
Did you select a paper size/type
that cannot be punched?
If the selected paper is not
changed and [Continue] is
selected, punch is released.
Select the available paper.
Select [Continue] to print.
page 6-11
Cannot read data in
this ID card.
― In registration process, the ID
card information was not read
correctly. Hold again the ID card
over the ID card reading part.
If the same message still
appears, the ID card may not be
compatible with this product.
Change it to another ID card.
―
Cannot recognize. ― Make sure your ID card has
been registered.
―
Cannot staple at the
specified position.
Have you selected a position
that cannot be stapled?
If the selected paper is not
changed and [Continue] is
selected, staple is released.
Select the available paper.
Select [Continue] to print.
page 6-9
Cannot staple this
paper.
*1
Did you select a paper size/type
that cannot be stapled?
If the selected paper is not
changed and [Continue] is
selected, staple is released.
Select the available paper.
Select [Continue] to print.
page 6-9
Cannot use ##### due
to a failure.
― Call service. ―
Message Checkpoints Corrective Actions
Reference
Page